Concrete Driveway Services Fresno TX
(409) 692-1638
Fresno is unincorporated, so driveway work usually falls under Fort Bend County rules rather than a city building department. Anything that touches the road approach or a drainage culvert typically needs a county permit. We handle the paperwork and the inspection scheduling as part of the job.
Four inches over a compacted base handles cars and light SUVs. If you park a work truck, a dually, a boat or an RV, we pour 5 to 6 inches with rebar. Clay moves here, so the reinforcement matters more than the extra inch of concrete.
Walk on it after about 24 to 48 hours. Park a normal car on it after roughly 7 days. Keep heavy trucks, dumpsters and concrete mixers off it for a full 28 days while the slab reaches strength.
Only if the old slab is stable and not moving. If the base underneath has failed, an overlay cracks in the same places within a year or two. We check the base before recommending it, and most of the time in this area a tear out is the honest answer.
Most Fresno driveways are 2 to 4 days on site: one day for demo and excavation, one for base and steel, one for the pour. Rain pushes the schedule, and the cure time after that is separate from the work days.
Hairline cracks at the control joints are normal and expected in any concrete slab. What should not happen is a wide crack running across the middle. Proper base compaction, rebar, and joints cut on the right grid are what keep the cracking where it belongs.
No. We come out, measure, look at the base and the drainage, and give you a written estimate at no cost and with no obligation.
Fresno TX Concrete Driveway Contractors | Installation and Replacement Services
If your driveway is cracking down the middle, sinking near the street, or too narrow for the trucks you park on it, you need concrete driveway services Fresno TX homeowners can actually count on. Mike Mouton and his crew have been pouring residential slabs across the south Houston area for over 40 years, and driveways are the work we do most.
Fresno sits on heavy clay that swells when it rains and shrinks when it dries. That movement is what breaks driveways here, not the weight of your car. Working with a concrete driveway contractor in Fresno TX who builds for that soil means a compacted base, real rebar, and joints placed where the slab actually wants to move.
Concrete Driveway Installation in Fresno TX That Starts With the Base
Most driveway failures in Fort Bend County start below the concrete, not in it. Our concrete driveway installation work spends as much time on the ground as it does on the pour, because a 4 inch slab sitting on soft, uncompacted clay will crack no matter how good the finish looks on day one.
Every new concrete driveway services Fresno TX install includes:
- Full excavation to depth, with soft spots dug out and replaced
- Compacted crushed stone base for load spread and drainage
- Rebar reinforcement tied on chairs, not mesh thrown on the dirt
- Slab thickness matched to what you park: 4 inches for cars, 5 to 6 inches for trucks, trailers and RVs
- Control joints cut on a proper grid so cracks land in the joint instead of across your slab
- Grading that pushes water toward the street, away from your foundation
- Broom finish as standard, with smooth or exposed aggregate available
You get one driveway pour every 25 or 30 years. It is worth doing right the first time.
Concrete Driveway Services We Offer in Fresno, TX
Fresno sits on heavy clay that swells with rain and shrinks in the heat, and that movement is what breaks driveways here. Our concrete driveway services Fresno TX cover the full range, from a brand new pour to fixing a slab that has already dropped, so you only pay for the work your driveway actually needs.
Concrete Driveway Installation
Our concrete driveway installation work starts below the surface with full excavation and a compacted stone base. Rebar is tied on chairs, and slab thickness is matched to what you park: 4 inches for cars, 5 to 6 inches for trucks.
Concrete Driveway Replacement
When the base under the slab has failed, patching is money wasted. Concrete driveway replacement means we demo the old drive, haul it off, rebuild and compact the base, then pour a new slab to current thickness and reinforcement standards.
Concrete Driveway Repair
Cracks that have stopped spreading, crumbling edges and broken corners near the apron can be fixed without a full tear out. Concrete driveway repair in Fresno, TX costs a fraction of replacement when the ground below is still solid.
Concrete Driveway Leveling
Slabs that sank but did not break can often be raised back into line. Driveway leveling removes the trip edge and the puddle in one job, and it keeps rainwater running toward the street instead of pooling against your foundation.
Driveway Extensions and RV Pads
Out of parking space? We widen driveways, add turnarounds and pour RV pads thick enough for the real axle weight. The new section is doweled into the old one and matched on height, slope and finish so you never feel a lip.
Resurfacing and Finishing
If the slab is sound but the top looks pitted and stained, concrete resurfacing lays a fresh wear layer over it at a fraction of the cost of new. Broom finish is standard, with smooth or exposed aggregate available on request.
Why Fresno, TX Homeowners Choose Mouton Concrete Services
There are cheaper crews working this area. There are not many still around in ten years to stand behind the slab they poured. Here is what you get when our crew handles your concrete driveway services Fresno TX project.
- Over 40 years on residential concrete: houses and driveways, not parking lots, so we know how Fort Bend County clay behaves.
- The owner is on the job: Mike Mouton runs the crew himself and answers the phone himself.
- Permits handled: customers regularly mention we chased down city and county inspections so they did not have to.
- The price you agreed to: written scope up front, no surprise line items at the end.
- Clean job sites: the crew cleans up daily, not just on the last day.
- Licensed and insured: full coverage on every residential pour.
Mike walks every finished driveway with the homeowner before the crew leaves. If something is not right, it gets fixed before we call the job done.
Get a Free EstimateOur Concrete Driveway Installation Process in Fresno, TX
Every concrete driveway services Fresno TX job follows the same six steps, whether it is a 400 square foot single car drive or a full circular approach. Here is exactly what happens on your property from the first visit to the final walkthrough.
Site Walk and Measurement
We check slope, drainage, tree roots, utility markings and where your water currently runs. Then we measure and set the thickness based on what you actually park on the slab.
Demo and Excavation
The old driveway comes out and gets hauled off. We dig to depth and pull out soft or organic material instead of pouring over it, because soft clay is what sinks a slab.
Base Build and Compaction
Crushed stone goes down in lifts and gets mechanically compacted, not just raked flat. This is the step most crews rush, and it is the one that decides how long your driveway lasts.
Forms and Steel
Perimeter forms are set to grade so water drains toward the street. Rebar gets tied and lifted on chairs so it sits in the middle of the slab, and expansion joints go in at the garage and the apron.
Pour and Finish
Concrete is placed, screeded, floated and broom finished for grip in the rain. Control joints are cut on a proper grid before the slab hardens so cracks land in the joint, not across your driveway.
Cure and Walkthrough
We cure the slab properly instead of rushing to the next job, clean the site, and walk the finished driveway with you. You get clear timelines on when you can walk on it and when you can park.
Book a Driveway Assessment in Fresno, TX Before You Replace
Homeowners usually wait too long, then pay for a full replacement when a repair would have held for another five years. Before you spend anything, get someone out to look at the slab. Here is what we check on every driveway, and what each one tells us about repair versus replacement.
Hairline cracks at the control joints are normal in any slab. A crack you can fit a coin into, showing up in three or more spots, means the base underneath has failed. Patching that only buys you a season.
When one panel sits lower than the next, the clay below it has shifted or washed out. If the slab itself is still solid, leveling fixes it. If the concrete is broken too, that section comes out.
Fresno gets heavy rain and the clay holds it. If puddles are still sitting on your driveway the next day, the original grading is gone and water is heading toward your foundation instead of the street.
Spalling is the top layer pitting off in flakes. Gulf Coast heat and humidity speed it up. A small patch can be resurfaced. If it is spreading a little further every summer, the concrete is breaking down.
Once you can see steel, the slab has lost its cover and water is getting to the reinforcement. From there it rusts, expands, and pushes the concrete apart from the inside. This one does not get patched.
Concrete driveways last 25 to 30 years. If yours is past that and you are calling someone out every spring, the money you keep spending on repairs is money toward a new slab that would last decades.
The Local Concrete Driveway Contractor Fresno, TX Homeowners Call
Mike Mouton has been pouring residential concrete on the Texas Gulf Coast for over 40 years. He still runs the crew himself, still answers the phone himself, and still walks every finished driveway with the homeowner before the trucks leave. That is the whole business model, and it has not changed in four decades.
Driveways in Fresno fail for one reason more than any other: the ground under them. Fort Bend County sits on heavy clay that swells after a Gulf storm and pulls back apart in an August drought. A slab poured on loose clay with mesh thrown on the dirt will crack inside two years no matter how clean the finish looked on day one. We build for that soil, every time.
So we dig out the soft spots instead of pouring over them. We compact the base in lifts. We tie rebar on chairs so the steel sits where it does something. We cut control joints on a real grid, and we let the slab cure instead of rushing to the next job. None of that shows up in a photo. All of it shows up in year fifteen.
Fresno is unincorporated, which means driveway approach and culvert work usually falls under Fort Bend County rules rather than a city permit office. We handle that paperwork and schedule the inspections ourselves, so you are not making phone calls on your day off.
Licensed and insured. Based in Santa Fe, TX and serving homeowners across the south Houston metro, including Fresno and Fort Bend County. Every driveway we pour meets local code and residential construction standards.
100% residential work
Owner on every job site
Concrete Driveway Service Areas Near Fresno, TX
Along with Fresno, our crew pours driveways for homeowners across Fort Bend County and the south Houston metro. If your address is in one of these communities, we can be out to look at your slab this week.
